Macro Keyboard for F360 (Poor Mans Streamdeck)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really wanted a streamdeck, but it's obviously a little over my budget.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 1269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really wanted a stream deck, but it's obviously a little over my budget. This is a great alternative and for my purpose, I set it up for Fusion 360 shortcuts! I have included the code, 3d files, and schematic. This project was based on this project and it would have been possible without it!
https://www.makeuseof.com/tag/make-custom-shortcut-buttons-arduino/
Print instructions
Set up to 6 create or modify options in your Fusion 360. When modifying the keyboard emulating Arduino Code, make sure each keyboard shortcut matches with the options in Fusion 360. Within Fusion 360 you can set custom keyboard shortcuts too which is really nice!
Make sure to print the buttons in the transparent filament (I used raw PETG). Add just a dab of super glue on the arcade button and center the button on top. DO NOT PRESS UNTIL DRY (Yes I did this and ruined a button). The reason why the buttons are glued on is so they can be easily replaced. This is pretty secure, I have been using my macro keyboard every day and the buttons are still very secure!
Things you'll need:
1x 3D printed front panel
1x 3D printed back panel
2x 3D printed support legs
6x 3D printed buttons
1x Arduino Leonardo
6x Zippy Arcade Switches
4x M4 Screws
header pins
all purpose wires
7x leds
6x 10K resistors
2x 100 Ohms resistors (for LEDs)
Super Glue