1 / 1
Polaris SL 750 Top Carburetor Intake Gasket — zdjęcie 1

Polaris SL 750 Top Carburetor Intake Gasket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is the gasket that goes between the intake screen holder and the top of the carb.

Ocena
0 / 5
Polubienia
6
Pobrania
22
Wydruki
0
Wyświetlenia
109
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

I needed to get the intake gaskets for a SL 750 and didn't want to spend the money on the gaskets since they aren't exposed to anything but air and mild heat. These need to be printed in TPU and should be all bottom and top layers with no infill. So if you see infill inside the part, bump up your top and bottom layer count. The part should be 100% solid. This might fit an SL 650 or the 780 but I don't have one to test so please let me know if you have one and it works.

Tagi