Alesis Nitro Mesh Feet Riser v1.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alesis feet riser incorporating the original rubber feet.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 171
- Wydruki
- 2
- Wyświetlenia
- 765
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've used cbaoth's raised feet for a while but I found them a bit slippery (even with TPU pads below them). So I decided to make my own risers so I can keep the original rubber feet.
I'm attaching STL as well as STEP files for any modification you might want to do. The model is partialy hollow to save on filament (you can still print it without supports).
Additional height - 104mm
v1.1:
I made the riser a bit more snug on the drum feet pipe. Looser version allowed for more play and thus compensating for any deviations from pipe verticality but I found it a bit too wobbly during sessions.
Choose the one you feel is more right for your setup.