Loewe Klang1 Speaker Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
90 and 120mm versions of a riser for Loewe Klang1 Speakers
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
two versions of a riser for Loewe Klang1 Speakers, in 90 or 120mm height and diameter.
there is a channel inside for the cable pair up to 8mm diameter to be hidden.
printed mine quite strong at 0.1mm layers in PETG with 3 perimeters, 6 top/bottom layers and 60% infill to gain weigh. used organic supports for a clean fitting at the top.
this uses the attachment bracket the speakers are mounted on when used with stands the manufacturer sells and also fits the bottom-cover.
as always I highly appreciate every like, rating or make, same for remixing and sharing.
donations will be forwarded to sea-watch.org