Gridfinity standing scalpel holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vertical holder for a hobby scalpel with compartments for blade boxes and blades. Gridfinity 1/1/1 unit.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 147
- Wydruki
- 5
- Wyświetlenia
- 619
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Vertical holder for a hobby scalpel. Has 2 compartments for blade boxes that come with such scalpels and 6 slots for blades. Designed so the scalpel rests on the handle and not on the tip of the blade. Doesn't tip over on its own, especially with magnets. Uses gridfinity 1/1/1 unit.
Scalpel sits relatively tight, so three versions of the model are provided with different sizes of the hole for the scalpel handle. Version 84 (named after hole diameter) worked for me.
Onshape link if you need further modifications.