1 / 2
Arzopa Q1 Monitor - VESA Adaptor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VESA adaptor/case for Arzopa Q1 portable monitor (15.6" 144Hz)
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 390
- Wydruki
- 1
- Wyświetlenia
- 3405
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (1)Kolekcje (43)Powiązane
This adaptor can hold an Arzopa Q1 monitor in a VESA arm or stand. Designed to click in and out from the top, allowing its removal by pressing on the top notches.
- Use M4 screws. Maximum 10mm, I used 8mm.
- Printed with supports on the notches. It might very well not be necessary, but I didn't want to risk a 6 hour print.
- Supports VESA 100x100 and 75x75 sizes
- Printed with ASA. Should be fine with most materials.
NOTE: Might fit other Arzopa models but I have not tried them.
NOTE 2: Dont print it standing lmao. Print it flat :)
