Samsung EX2220 monitor stand hinge replacement spare part

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The original part breaks easily on this monitor, this is a replacement part In order to replace the part you need to…

Ocena
0 / 5
Polubienia
1
Pobrania
36
Wydruki
0
Wyświetlenia
568
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

The original part breaks easily on this monitor, this is a replacement part

In order to replace the part you need to remove the monitor plastic cover (you need to start from the frontal frame, it's easy), look for a video on youtube, there is one for this specific monitor

I deliberately avoided adding the locking tooth to the model since this way I can easily remove the monitor from the stand if needed, just by lifting it

Print instructions

Print in ABS or tougher (Nylon or PC), glue the two parts together with superglue (or acetone in case of ABS)

Print with the flat sides on against the bed, i suggest using 3 perimeters (I used 40% infill)

The support is only required for the screw pipe

Tagi