1 / 1
The Ultimate Spool Holder Honeycomb-Edition
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have created a Honeycomb-Version of the famous TUSH. Better looking and about 25% less material and print time.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
Remix of the popular TUSH - The Ultimate Spool Holder by filamentry
I have created a Honeycomb-Version of the famous TUSH.
Better looking and about 25% less material and print time.
Use case:
A simple snap-fit spool roller.
Additional informations and assembly:
You'll have to load the file into Prusa-Slicer as project and add your:
Temperature setting
Retraction setting
Extrusion multiplier
Leave the rest as it is and it should slice like shown on the cover photo
The assembly process is straightforward:
1. Insert the ball bearings
2. Snap the other half in place
I used some glue on the inside of the bearings and on the bottom,
clamped it in place and sand it flush after drying for more durability.
You'll need:
-4x printed part
- 4x 608 ball bearings
Feedback:
If you find this model useful, please feel free to show your appreciation by liking it. You can also share it, showcase your prints using it, or provide suggestions for improvement. Your feedback is greatly appreciated and reaward for the work i put into this.