Cali Otter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This otter is inspired by the Cali Cat model on thingiverse: https://www.thingiverse.com/thing:1545913 Otters are my…
- Ocena
- 4,833 / 5
- Polubienia
- 45
- Pobrania
- 359
- Wydruki
- 6
- Wyświetlenia
- 1779
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
This otter is inspired by the Cali Cat model on thingiverse: https://www.thingiverse.com/thing:1545913
Otters are my favorite animal and the cali cat is my favorite thing to to print so I decided to combine them. I highly recommend printing this model upside down to avoid any nasty overhangs. If you can print it right side up I would appreciate if you could comment with your print settings because I could not get a good right side up print.
Print instructions
Like I said I recommend printing this upside down so that you don't get some nasty overhangs.
I used the default prusament profile on Prusaslicer and modified the nozzle temperature to be 220C