1 / 3
3 in 1 candleholder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 similar candleholder which fit together into one. There are made for candles with a diameter og 2cm
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
Rotate the model so it is facing down. Print time is between 2 to 4 hours depending on layer height.
No need for support in the hole if you use a low enough layer height. I printed them all without on 0.20mm layer height.
Made for 21 mm diameter candles.
Do not print with fuzzy skin!