Customizable Welcome Baby Sign (No MMU / Tool Changer required)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yes, a MINI can print this in all Colors!
- Ocena
- 5 / 5
- Polubienia
- 91
- Pobrania
- 235
- Wydruki
- 5
- Wyświetlenia
- 1405
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
As you may have guessed, this involves a lot of color changes and trickery.
At the time I was printing this, I haven't had any skin tone or orange filament at home. However, the legs and beak of a stork are of a reddish orange tone and babies faces by definition come in all sorts of skin tones. All I had was “Transparent Red PLA”.
Solution: 2 layers of White, 1 layer of Transparent Red for the skin and 2 layers for legs and beak.
If you have skin tone and reddish orange available, consider yourself lucky, no trickery required.
Again, there are two ways to get the text on this:
- Edit in OpenSCAD (put scad and svg files together)
- Add via Prusa Slicer (see Templates folder)
You can switch between a 4 hole (one on every corner) and a 1 hole design.
If you print this in full color, please post a make, I'd love to see how this turns out in other colors.
Printing
Please use 0.2mm layer height, the model is tuned to this height.