InMotion V12 Airtag/SmartTrack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach an AirTag or Eufy SmartTrack to your V12
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 880
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a no frills mount for attaching an Apple AirTag or Eufy SmartTrack Link tracker to your InMotion V12 handle.
The SmartTrack is bigger by a few millimeters and the AirTag is a bit thicker by a few millimeters. That means there's a little bit of room no matter which you use.
It uses one of the 2 handle bolts on top. You remove the one that's closest to the back and it's a M5x10. Replace it with a M5x25 (easy to source from your local hardware store).
Does not interfere with use of the InMotion seat.
I printed in regular PLA, although PETG would be a good choice too. I also stuffed the tracker in a small plastic bag for additional water resistance.