Mount for Wyze Cam Outdoor to fit Wild Birds Unlimited Advanced Pole System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy print/easy mount Bird feeder mount for the Wyze Cam Outdoor
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 540
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This one piece fixed mount can be attached to one of “Crook Arm” attachments for the Advanced Pole System sold in Wild Birds Unlimited stores in the US. This pole system is a little pricey, but strong and well made, and can be used with different types of hooks to hang feeders, flower baskets and bird houses.
This mount can be simply set one one of hooks on the end of the crook arm, and combined with the Wyze Cam outdoor, will provide camera coverage for 2 or 3 feeders also hanging from the pole. It will be too close to provide complete coverage of everything you could hang off the pole, but with the ability to rotate the Wyze cam and the crook arm, you can adjust coverage to where you want it.
It does not prevent the crook arm from also being used to hand a feeder from.
-This prints without supports in one piece.
-It is about 212 mm wide, so only fits horizontally on the i3 printers.
Three versions are available, a low height version that uses about 80 gms PETG filament @ 15% infill (the “L” version) , and a high version that gets above the crook arm ("H" version), but requires about 101 gms PETG. A 3rd, long version that takes full advantage of the size of the i3 build plate, at 260 mm, is also included, which requires 111 gms filament. It must be angled corner to corner on the build plate to fit.
WBU APS Crook Arm
APS EZ-Attach Single Crook Arm | Wild Birds Unlimited (wbu.com)
Wyze Cam outdoor