Zoom gear for Tokina 10-17 Fisheye lens on Nauticam housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a zoom gear for use on a Tokina 10-17 lens on a Nautucam housing.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 591
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is a zoom gear for use on a Tokina 10-17 lens on a Nautucam housing. It requires a M3 hex bolt and nut to secure the gear to the lens.
NOTE: You must remove the rubber cover from the lens ring before installation, the same as you would when installing the original Nauticam gear.
Print instructions
Category: Camera Summary
This is a zoom gear for use on a Tokina 10-17 lens on a Nautucam housing. It requires a M3 hex bolt and nut to secure the gear to the lens.
NOTE: You must remove the rubber cover from the lens ring before installation, the same as you would when installing the original Nauticam gear.
Print Settings
Rafts:
No
Supports:
No
</div>Resolution:.3 draft
Infill:
Any
</div>Filament:
Any Any Any