Diffuser for Inon Z330 strobe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a diffuser for an Inon Z330 underwater strobe.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 619
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is a diffuser for an Inon Z330 underwater strobe. This can be printed with tinted filament to create colored filter effects. See more on this on my blog at https://www.divetech.com/post/shooting-with-light-and-filters
I printed these with an FDM printer using translucent PETG. However they work best when printed in clear resin using a SLA resin printer.
Print instructions
Category: Camera Summary
This is a diffuser for an Inon Z330 underwater strobe. This can be printed with tinted filament to create colored filter effects. See more on this on my blog at https://www.divetech.com/post/shooting-with-light-and-filters
I printed these with an FDM printer using translucent PETG. However they work best when printed in clear resin using a SLA resin printer.
Print Settings
Rafts:
No
Supports:
Yes
</div>Resolution:.2 quality
Infill:
100% - use more permiters.
</div>Filament:
Any PETG works best. Clear, blue, green as desired.