1 / 4
Handle with CARE - it's a furniture handle - 128 + 160mm version
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a furniture handle. It says "CARE" on the top. Therefore it is a Handle with Care. This is funny.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I know this is kind of pointless but I think it is very funny.
It is a handle for furniture in the System32-grid, there are versions for both 128 and 160 mm hole spacing.
I printed it with the holes facing down to the printbed, added a brim and supports on the printbed. Especially for PLA I would suggest at least 4 perimeters for the “legs”.
Fixes with the standard M4 screws, you might need to re-cut the threads or force the screw into there the first time, then it is very rigid.