Swappable BentoBox v2.0 Containers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stack the HEPA filter and activated carbon containers the way you want.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 125
- Wydruki
- 1
- Wyświetlenia
- 928
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
23/08/04 Update : I included a photograph that shows the BentoBox sucking up smoke while having the HEPA filter below the activated carbon container, proving that the two 4020 fans are strong enough to suck air inside even with the HEPA filter below causing unoptimal air flow.
I understand the original BentoBox v2.0 containers had bumps and grooves on the top and bottom sides specifically designed so that you can only stack them in the intended order.
But I didn't like how the activated carbon dust can get blown by the fans and spread inside the printer.
So, I changed the shapes to allow you to stack and swap them however you want. I also changed the HEPA filter container's size because it looked nice.
Thermostat switch covers are also included that are inspired by Rob the 3D Printing Dad's thermostat switch cover. You can check it at the link below.
https://www.printables.com/model/392437-thermostat-switch-cover-for-bentobox
Thermostat switch link : https://nl.aliexpress.com/item/32369436039.html