1 / 1
Pajero/Montero/Shogun Gen 2 Socket for ARB/Tyrex Diff Lock button
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter to use the existing tiny hole to the right of the ignition keyhole for the diff lock button without…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 349
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an adapter to use the existing tiny hole to the right of the ignition keyhole for the diff lock button without having to carve anything.
I used a very stiff PETG as a regular PETG was not clicking well enough into place(worked but with enough force it'd come off).
Make sure to print with one of the faces with the circle holes as the base for higher strength in the levers.
Category: Vehicles