Pajero/Montero/Shogun Gen 2 support for Tyrex compressor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This applies to 4M40 model, which should have enough space on the left of the motor housing(right if your vehicle…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 312
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This applies to 4M40 model, which should have enough space on the left of the motor housing(right if your vehicle wheel is on the left).
The support elevates the compressor and levels it. It is easy to mount with 14mm m6 screws and auto lock nuts, but you will need to trim the screws afterwards. Be careful with using this placement if you have oversized tires that scratch the inner tyre housing.
The location is right on top of the wheel hub, slightly to the back, it has the form of the metal in there.
Print in high temperature stable plastics like ASA or ABS. I used ASA.
Category: Vehicles