Schale Selica Trockner / Bowl Selica dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Schale zum trocknen Selica Kugeln / Bowl for drying Selica balls
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 436
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Schale zum trocknen von Selica Kugeln in Bambu Lab Drucker.
Ich lege die Kugeln in die Schale und stelle auf die Heizbett für ca. 1 - 2 Stunden, bei 70 Grad.
oder über Filament trocknen Menü von Bambu Lab für PETG.
Das Selica ist dann wieder einsatzbereit.
Es funktioniert auch auf anderen Druckern.
------ ENGLISH ------
Tray for drying Selica balls in Bambu Lab printer.
I put the balls in the tray and put on the heating bed for about 1 - 2 hours, at 70 degrees.
or over filament dry menu from Bambu Lab for PETG.
The Selica is then ready for use again.
It also works on other printers.
Print Settings:
Printer: Bambu Lab X1C
Print time: 1 h 56 min.
Filament: PETG, 19,64 m, 59,98 g
Filament Brend: Material4Print Black
Resolution: 0.2 mm
Infill: 15%
Brim: No
Rafts: No
Supports: No