1 / 3
HSW Ratchet wrench and socket set (5-12mm) holder — zdjęcie 1
1 / 3

HSW Ratchet wrench and socket set (5-12mm) holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for ratchet wrench and set of sockets (5-12mm)

Ocena
5 / 5
Polubienia
18
Pobrania
106
Wydruki
1
Wyświetlenia
854
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

Holder for ratchet wrench(gola, 1/4", 153mm of length) and set of sockets (5-12mm)

Mounted to HSW with 3 M3 inserts with nuts and M3x10 screws.

For the top most M3 screw I used low profile half round head. For the other two, the shape of head is not important(there is more room to hide it).

The socket mounts are loose on purpose, as I don't expect any tremors where I live, so sockets just sit there. If you live in area with earthquakes, you might want to make a tighter fit.

Tagi