1 / 3
2 Piece Feet for Ikea Skadis Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A larger stand for more stability
- Ocena
- 5 / 5
- Polubienia
- 127
- Pobrania
- 1134
- Wydruki
- 5
- Wyświetlenia
- 5071
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 5) (Komentarze: 6)Remiksy (1)Kolekcje (223)Powiązane
Using Low-Profile Ikea Skadis Stand by BN3D as a staring point, this remix has two sides that create a similar style leg for the Skadis peg board.
Each leg is 120mm wide and 80mm high. The two pieces join using the bolt that comes with the Skadis and a 4mm nut.
Print laying on the side, no supports needed.