Ring Cam Recpetacle Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Bracket can used with or without a spacer. Spacers are so the cam can be mounted at a greater downward (or upward if assembly is installed inverted relative to my picture) angle. I would jump right to the 10 degree spacer and not use the 5. This was designed for the 2nd gen Cam, but it should work for the first gen as well.
Without a spacer, use (2) M3 8mm flat head screws and (2) nuts (not nyloc, they wont fit).
With the 5 degree spacer, use (2) M3 10mm flat head screws and (2) nuts (not nyloc, they wont fit).
With the 10 degree spacer, use (2) M3 12mm flat head screws and (2) nuts (not nyloc, they wont fit).
With the 20 degree spacer, use (2) M3 20mm flat head screws and (2) nuts (not nyloc, they wont fit).