Mad Cutter: PTFE tube cutter & Bambu Lab scraper stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PTFE 4 mm tube cutter made to be used with Bambu Lab scraper.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 136
- Wydruki
- 6
- Wyświetlenia
- 1006
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Check it out! I came up with this PTFE tube cutter that works perfectly with the small Bambu Lab scraper. I wanted something that's super simple and easy to use. I'm no expert at 3D modelling, so I tried out Tinkercad and managed to whip up my very first 3D tool 😁
If you're interested in printing your own, just go ahead and use the Bambu Studio 0.20mm Standard profile. As for the infill, I went with 50% to give it a bit more weight, but that's totally up to you.
Oh, and there's a special slot for two 8x1mm magnets, in case you wanna use 'em. (I actually added the second magnet after testing mine out.) 5x1 magnets can also be used for the eyes, but they may not have sufficient strength to support the weight of the print if you choose to use more than 15% infill.