1 / 1
Mod for 608 bearings and TPU tires at 150% scale.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a version that I did so I could use a 608 bearing and TPU tires.
- Ocena
- 4,75 / 5
- Polubienia
- 61
- Pobrania
- 322
- Wydruki
- 4
- Wyświetlenia
- 1544
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (0)Kolekcje (125)Powiązane
This is a version that I did so I could use a 608 bearing and TPU tires.
Print instructions
I printed in PETG and the tires in TPU.
Print at 0.2mm.
Glue together body half's. The rest snaps, locks or press fits.
Note: axle-b has a bit bigger part where the 608 press on. Try this if the normal axle is loose.