1 / 10
40oz Water Bottle Cup Holder for Subaru Crosstrek/STI/WRX — zdjęcie 1
1 / 10

40oz Water Bottle Cup Holder for Subaru Crosstrek/STI/WRX

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remixed model of the "2019 Subaru Crosstrek_40 oz Water Bottle Holder" made by tomecar.

Ocena
4,5 / 5
Polubienia
51
Pobrania
391
Wydruki
3
Wyświetlenia
4005
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

This is a remixed model of the "2019 Subaru Crosstrek_40 oz Water Bottle Holder" made by tomecar. The goal of this remix was to reduce overhang angles to a max of 45º and to smooth out the overall geometry and appearance.

 

Compatibility

I have not had an opportunity to test the compatibility on anything other than a 2019 Crosstrek. The other models listed use the same cup holder mat (92177AG170) leading me to believe that the cup holders they are paired with would have very similar if not identical dimensions and clearance. 

Here is a list of compatible models/years/trims that I got off of Subaru's website:
Subaru Crosstrek 2.0L 5MT Premium2016, 2017
Subaru Crosstrek 2.0L CVT Premium2016, 2017
Subaru Crosstrek 2.0L HYBRID CVT Premium2016
Subaru STI 2.5L TURBO 6MT Base2015, 2016, 2017, 2018, 2019, 2020, 2021
Subaru STI 2.5L TURBO 6MT LIMITED2015, 2016, 2017, 2018, 2019, 2020, 2021
Subaru STI 2.5L TURBO 6MT Premium2018, 2019, 2020, 2021
Subaru STI 2.5L TURBO 6MT Sport SEDAN2012, 2013, 2014
Subaru STI 2.5L TURBO 6MT TYPE RA2018
Subaru STI 2.5L TURBO 6MT WAGON2008, 2009, 2010, 2012, 2013, 2014
Subaru WRX 2.0L 6MT Base2015, 2016, 2017, 2018, 2019, 2020, 2021
Subaru WRX 2.0L 6MT Limited2015, 2016, 2017, 2018, 2019, 2020, 2021
Subaru WRX 2.0L 6MT Premium2015, 2016, 2017, 2018, 2019, 2020, 2021
Subaru WRX 2.0L 6MT PREMIUM HK2017
Subaru WRX 2.0L CVT Base2015, 2016, 2019
Subaru WRX 2.0L CVT Limited2015, 2016, 2017, 2018, 2019, 2020
Subaru WRX 2.0L CVT Limited w/EyeSight2016, 2017
Subaru WRX 2.0L CVT LIMITED WITH LIP ES2018, 2019, 2020, 2021
Subaru WRX 2.0L CVT Premium2015, 2016, 2017, 2018
Subaru WRX 2.0L CVT PREMIUM WITH LIP ES2019, 2020, 2021
Subaru WRX 2.5L TURBO 6MT S2092019

 

Print Settings

Printer:

X1-Carbon

Rafts: 

No

Supports:

No

Resolution: 

0.3mm Layer Height / 0.6mm Hardened Steel Nozzle

Infill:

25% Support Cubic

Filament:

Polymaker ASA (Scaled to 100.80% to compensate for ASA shrinkage)

Notes:

Printing this model took less than 2hr @0.30mm layer height. I recommend printing in heat resistant filaments. I personally chose to use ASA due to it's temperature tolerances and UV resistance. I believe PETG would also be sufficient.

I've included the .step file for this model which should hopefully make it easy to adjust any dimensions if needed. The unaltered dimensions of the model are as follows:

Upper half:

  • Outer Diameter: 100mm
  • Inner Diameter: 95mm
  • Height: ~80mm

Lower half:

  • Outer Diameter: 75mm
  • Inner Diameter: 70mm
  • Width of Flat Side: 65mm
  • Height: ~60mm

Model overall size: 100mm x 145mm

 

Tagi