Replacement Handle for Contigo Jackson Water Bottle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seems like the handle is not 8-year-old-proof as my son broke 2. Requires the original metal rod.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 326
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
This is a replacement handle for a Contigo Jackson Water Bottle. My son broke 2 and I didn't want to throw them out. There is a metal rod holding the handle in place and one side apparently likes to come off. This handle requires using that metal rod and assume that the one side came off. Pictures with black handle are the broken one. Blue is the new one.
Fixins:
-Original metal rod from the Contigo (one side missing)
-1x M3*5 stainless steel screw for securing the rod
-New handle print and cap print
Print settings:
-7 perimeters to make sure the support is filled
-I used PETG so I know it can go in the dishwasher
Instructions:
1. Remove original metal rod
2. Remove original handle
3. Insert metal rod through the new handle and the lid hinge. NOTE: the new handle is not symmetrical. It has one side that has a bigger opening to fit the head of the metal rod
4. The smaller side of the metal rod should fit snugly in the opposite end of the handle. I used the end of the table and pushed the head of the metal rod into the handle.
5. Screw in the cap to make sure the rod doesn't work its way back out