Sortimo A3 insert with dividing wall - T-Boxx 2018+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Sortimo A3 inserts with a solid divider.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 276
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an older mod/design of mine originally uploaded to Thinigverse. Figgured it could serve someone here as well.
It's two versions, one where the dividing wall is flush with the top of the insert and one where it protrudes above the top. For larger parts the one that's flush will work in most cases, however if you're planning to use smaller items inside the “chambers” i would advice you to use the raised version.
To save on supports/print time this approach to 3D printing the Sortimo inserts calls for glue-in feet/bottom pegs rater than having them printed with the insert ("lots" of supports).