Door joints for Wazer Waterjet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We have a Wazer waterjet at the Fablab, and we were tired of using masking tape to prevent water and sand to come out…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
We have a Wazer waterjet at the Fablab, and we were tired of using masking tape to prevent water and sand to come out of the sides of the door during cuts, so I made those joints.
They just snap on the sides of the acrylic door et work perfectly !
Spacing between the side of the door and the frame is not the same on both sides, but I guess it can vary on each machine, so I uploaded the Fusion360 file as well so you can make your own adjustements.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10
Filament:
Filamentum 98A TPU
Notes:
For more flexible parts, print with only one perimeter and concentric infill.
Category: 3D Printer Parts