Phillips Vacuum Nozzle Attachment Ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This rings connects the tube and the nozzle together from a phillips vacuum nozzle.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This rings connects the tube and the nozzle together from a phillips vacuum nozzle. I created two version of this ring, one with wide edges which are 16mm and one with small edges with 9mm.
To put on the ring to the tube connector you have to cut it in the middle. I could have removed it in the STL file but I thought this would be easier to do by hand.
Then when the ring is on the connector, you have to push it really hard against the nozzle and then it should click right into it.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.10mm
Infill:
20%
Category: Replacement Parts