Monitor Stand Leg for 200x18mm shelf piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Legs that fit a 200x18mm sized shelf piece, so you can use it as a monitor or laptop stand.
- Ocena
- 0 / 5
- Polubienia
- 110
- Pobrania
- 224
- Wydruki
- 0
- Wyświetlenia
- 1429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
About this design
With the help of a shelf piece and a bit of 3d printing filament you can create a handy monitor or laptop stand. I used a 200x18x600mm sized piece of PAL.
The decorative holes can be also used to route your cables.
I used this design for more than a year as a laptop stand, and I didn't have any issues with it, so I'm confident that it can take a beating.
BOM
A piece of wood that has a cross section of 200x18mm
Design and print information
Designed with Fusion360.
Printed with Creality Ender 5 pro.
Material PLA; nozzle: 0.4 mm; layer height: 0.28 mm; infill: 20%; wall line count: 3; supports are not needed.