KnifeKey
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A keychain, boxcutter and shoppingcart coin. Such a versatile little thing.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's abviously a keychain but also a boxcutter. Sharp enough to cut any boxtape or other packaging stuff that keeps you seperated from your precious box content. But it will not cut your fingers or poke you when you keep it in your pocket.
And if that's not enough, the backside is the size of a 50 eurocent coin so it opens up most shoppingcarts.
It's the easiest print ever and will be done before you pour yourself a cup of coffee. It print is PLA, PETG, ASA, ABS, FairyDust filled plastic, basicly anything. Well not flexibles maybe. It works at 0.3mm layerheight, 0.2, 0.1 or anything in between. Also 0.4 and 0.6 nozzle. Did I say this was the easiest print ever?
Give them to your friends and family! I've uploaded a blank one so you can customize it with your name or whatever you want. Even a simple colorchange will make it pop! And with fancier printers with a MMU or AMS you can go even further with your colors.
Enjoy!