Befenybay Top Mount Spool holder 2020 frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created a top mount spool holder that works with this....…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I created a top mount spool holder that works with this....
https://www.amazon.com/gp/product/B07Z756H2X/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&th=1
The versions I have seen on here did not fit the spacing of the screws. On the actual spool holder, the spacing is ~24mm, but the versions I've seen on here were a lot smaller spaced. I measured with calipers to get the distance correct, then got a good angle to give some space from a top mounted extruder.
My extruder is mounted at a 60 degree angle on the top of my 2020 frame. The bracket I have made should fit a number of different 1kg spools. It uses M5 screws. I forget their length but I can check and repost here. It's between 10-20mm. I used the original nuts and screws that came with the spool holder.
Print Settings
Printer Brand:
TEVO
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30
Filament: Priline PLA Black
Notes:
Printed in PLA. No supports needed. rnrnI printed with 4 walls, 5 solid top and bottom layers. I think the infill was 30%, could go more if you wanted.
Category: 3D Printer Accessories