D20 Elegoo Mars / Pro Cover Knob (or any printer)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a D20 knob for my Elegoo Mars Pro table top edition printer. Of course it could be used with any resin printer.…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I made a D20 knob for my Elegoo Mars Pro table top edition printer. Of course it could be used with any resin printer. The square on top is 70mm square.
Printed it with 4 walls, 25% infill.
The print took right about 4 hrs for .2mm layer height, using a .4mm nozzle, printed in PLA. No supports were used. 45mm/s print speed.
Attach the knob to your case with double sided tape, dual lock 3m velcro, whatever you like. I've even seen people drill 4x holes through the print's corners/base and the top of their case to secure these knobs with M3 locking nuts and screws.
Print Settings
Printer Brand:
TEVO
Printer:
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
25%
Filament: Enomaker PLA Silver
Category: 3D Printer Parts