3DFused X Gantry Alignment Guide for Tevo Tornado

*****Updated 12/1/20 : I created a version that is 20mm taller than the original hooks I created. Both versions are now here. I made a taller version because the X gantry was too close to the top of the frame when leveling the gantry. It would press into the wires going from the hotend to the control box. I didn't like that. plus it can be extra work to disconnect everything from inside the box and fish the wires out just so that the hotend wires don't collide with the top of the frame when leveling. If you want to avoid that like me, try printing the taller versions. Each have their own versions flipped/mirrored, so you don't have to do any mirroring in your slicer.

This is an X gantry alignment tool for use with a 3dFused linear rail kit for a Tevo Tornado printer. The remixes for the Ender version didn't fit the Tevo X rail, so I created a slightly larger space for the rail to sit in, it was too tight and couldn't sit level. The original, shorter mod I created will work best if you first remove the top bar on the printer frame, or undo the wiring to your hotend. The 20mm taller mod hook is to prevent you from removing the top 2020 frame support, and your wires won't get smashed by that top bar (that could also depend on how you have your wires routed form your hotend). “_(ツ)_/“

I included 2 files, one is mirrored so you can move the pieces on the print bed to your liking.

Print Settings

Printer Brand:

TEVO

Printer:

Rafts:

No

Supports:

Resolution:

.2mm

Infill:

Filament: Enomaker PLA

Notes:

Category: 3D Printer Accessories