1 / 1
Improved Silicone Nozzle Scrubber with Bucket for Voron 2.4
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps your nozzles from getting eaten!
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 215
- Wydruki
- 1
- Wyświetlenia
- 2664
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (62)Powiązane
I'm listing this as a remix, although I've re-modelled it from scratch (with changes) so I could include the STEP files.
Brush Size: ~46mm wide, ~11mm deep, cut 10mm from the bristles - I used the larger of the brushes from this set. The bristles are also cut to 10mm tall, so overall the brush is 20mm tall before you put it in the holder.
You may want to check fit before cutting the bristles in case your bed is mounted differently, but ~10mm seemed like the sweet spot for me.
Changes from the original:
- Resized brush holder
- Improved clearance on the magnet holes
- Added an optional hole in the brush holder for screwing up into the brush for added security (not needed in most cases)
- Improved the geometry of the bucket to get closer to the bed
- This and setting my Y size to 355 let me use this with tap. I have a CNC tap so YMMV with the printed one
- Widened bucket