Dog Tags - (Blank - Customizable, Editable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Saw people requesting help with editing text of dog tags from u/Hoopja and tried it myself and couldn't get it to…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 215
- Wydruki
- 1
- Wyświetlenia
- 533
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
Saw people requesting help with editing text of dog tags from u/Hoopja on thingiverse(https://www.thingiverse.com/thing:5443605) and tried it myself and couldn't get it to work... decided to just remake the dog tag and give people the STEP, OBJ, and STL files... should be able to import/open the OBJ with tinkercad for quick editing(i also used STEP files in fusion) to add whatever text you want.
Hope it helps!
Print Settings
Printer:
OG Prusa Mini
Rafts:
No
Supports:
No
Resolution:
.15
Infill:
100%
Filament:
Grey
Notes:
Might need a brim depending on how good your bed adhesion is.
How I Designed This ===================
Just used Fusion 360 and started from scratch.
Created a sketch.
Drew two fit point splines 30mm long, 50mm apart from each other, with a 2mm curve.
Drew two 46mm lines connecting the two splines.
Extruded the sketch 2mm.
Created a sketch on the face of the dogtag body.
Repeated the previous sketch steps but slightly smaller to create the inner portion of the dog tags.
Extruded the new sketch down -.5mm.
Created a cylinder in the middle of the top portion of the dog tags to create a hole.
Category: Props