1 / 4
Aeon's End - Game Component Organizer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organizer for the all the components of Aeon's End with room for extensions.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 1105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (34)Powiązane
Game component boxes for Aeon's End. Can also fit extensions. Designed for swift game setup. Selecting cards and building the nemesis deck takes time anyways, so it's better if at least the token come sorted.
Features
- Lot's of space for cards, boards and token
- Everything fits snugly into the box, no lids or rubbers needed, can be stored vertically
- FreeCad 0.20 source included for modifying and remixing. Enjoy.
- Tested with wave 1 and wave 2.
Print Instruction
- I've printed this on a Voron 2.4 (350) with a 0.6 nozzle
- Card_Storage_A is too large for a Prusa i3
- Can be fixed using the cut feature in PrusaSlicer 2.6
- Token_Holder_A is only needed for good fit and maybe excess token
- You could also enlarge the Rift_Holder if you like
- Some models are large and prone to warping (even with PLA)
- If they warp: there's no shame in using a brim
- Quantities to print
- 1x AeonsEnd-Card_Storage_A
- 1x AeonsEnd-Card_Storage_B
- 1x AeonsEnd-Tableau_Dial_Holder
- 1x AeonsEnd-Rift_Holder
- 1x or 3x AeonsEnd-Token_Holder_A (depending on your needs)
- 3x AeonsEnd-Token_Holder_B