Ithaca Generator Maker Coin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Maker Coin I designed for Ithaca Generator, the maker space I'm a part of.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
A Maker Coin I designed for Ithaca Generator, the maker space I'm a part of.
I designed it to be printed in two contrasting colors by swapping filament on layer changes. There are two versions: one with a single bottom color layer, where the QR code will be displayed as the middle filament color; and one with three bottom layers, where the QR code will be displayed as the upper and lower filament color.
Print instructions
Category: Signs & Logos Summary
A Maker Coin I designed for Ithaca Generator, the maker space I'm a part of.
I designed it to be printed in two contrasting colors by swapping filament on layer changes. There are two versions: one with a single bottom color layer, where the QR code will be displayed as the middle filament color; and one with three bottom layers, where the QR code will be displayed as the upper and lower filament color.
Print Settings
Printer:
RailcoreII 300ZL
Rafts:
No
</div>Supports:No
Resolution:
0.2 mm
</div>Infill:15%
Filament: Hatchbox PLA Yellow and black
Notes:
Used Prusa Slic3r to set filament changes after the bottom three and before the top three layers.