Parametric hole plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a quick little plug to cover the screw access holes in my lazy-susan 3D printer building platform—screws and…
- Ocena
- 4,5 / 5
- Polubienia
- 28
- Pobrania
- 493
- Wydruki
- 3
- Wyświetlenia
- 3474
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I needed a quick little plug to cover the screw access holes in my lazy-susan 3D printer building platform—screws and junk kept falling in and jamming up the rotation. These little plugs solved that! They include a little plier grip for helping take them out later.
The included STL fits a 16.2 mm (5/8") hole, but the Fusion 360 file is parametric for hole diameter and plug prong depth for resizing. I'm undersizing by about .2 mm to get a good snug fit, so these plugs are sized at 16 mm for the 16.2 mm hole.
Print instructions
Category: Parts Summary
I needed a quick little plug to cover the screw access holes in my lazy-susan 3D printer building platform—screws and junk kept falling in and jamming up the rotation. These little plugs solved that! They include a little plier grip for helping take them out later.
The included STL fits a 16.2 mm (5/8") hole, but the Fusion 360 file is parametric for hole diameter and plug prong depth for resizing. I'm undersizing by about .2 mm to get a good snug fit, so these plugs are sized at 16 mm for the 16.2 mm hole.
Print Settings
Printer:
Artillery3D Sidewinder X1
Rafts:
No
</div>Supports:No
Resolution:
0.3 mm
</div>Infill:10%
Filament: 3D Solutech PLA Blue
Notes:
printed 4 of these plugs in 17 minutes with a 0.8mm nozzle.