TronXY X5SA Reverse Bowden
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a reverse bowden mount for a TronXY X5SA (Pro)
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 623
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a reverse bowden mount for a TronXY X5SA (mine was bought in 2022)
Should work with both the pro and non-pro models and any size of them.
This is for use with a direct drive mod and redirects the tube to go through the cable chain that came with the machine.
My extruder is a H2 but it should work with any direct drive with enough slack at the other end. Here is the TinkerCAD link to remix to fit to your needs.
Hardware needed:
2x M4x12 Screws
2x M4 Hex Nuts
1x Bowden Tube Coupler (PC4-M6)
Attaches to the stock cable chain mount on the back frame. Replace original bolts with M4x12 screws. Screw the chain to the mount and snug the screws, there should be quite a bit of the screw sticking out the back of the metal plate. Slide the printed mount onto the back and secure with the hex nuts onto the protruding screws. Screw the bowden tube coupler into the larger hole, it should thread snugly into the plastic.