BLV MGN Cube — front panel remix for tablet dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified front panel for BLV MGN cube.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 1028
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Modified front panel for BLV MGN cube. I remixed the stock design to accommodate my wireless charging dock and case for 7" Android tablet.
Because I will be fully enclosing this build, I also added a doorstop for the acrylic doors to close against, with spaces for magnets to keep the door closed.
In addition, I wanted to change a few things to improve printability and assembly:
- changed big fillets to chamfers, which tend to print better
- added sacrificial support layer for unsupported holes
- small chamfers around all surfaces on build plate
- nesting interface between panels to align and lock together
- positions for screws to attach panels
I also relocated buttons and added an extra space (because MOAR BUTTONS), and changed to 2 instead of 3 panels. This requires use of a 300mm build platform.
Print instructions
Category: 3D Printer Parts Summary
Modified front panel for BLV MGN cube. I remixed the stock design to accommodate my wireless charging dock and case for 7" Android tablet.
Because I will be fully enclosing this build, I also added a doorstop for the acrylic doors to close against, with spaces for magnets to keep the door closed.
In addition, I wanted to change a few things to improve printability and assembly:
- changed big fillets to chamfers, which tend to print better
- added sacrificial support layer for unsupported holes
- small chamfers around all surfaces on build plate
- nesting interface between panels to align and lock together
positions for screws to attach panels
I also relocated buttons and added an extra space (because MOAR BUTTONS), and changed to 2 instead of 3 panels. This requires use of a 300mm build platform.Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
</div>Rafts:No
Supports:
Yes
</div>Resolution:0.16
Infill:
25%
</div>Filament:
Polymaker Polyflex TPU Black