Voron Can Bus z-chain move horizontal mount with strain relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added strain relief to horizontal z chain mount for umbilical mod.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 289
- Wydruki
- 2
- Wyświetlenia
- 3540
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Only added strain relief to ‘Z-Chain-Horizontal - igus.stl’ file for my own vision of umbilical wire path used along with klicky & chain mount from his project and gantry part of ‘umbilical mod’ from here https://www.printables.com/model/384279-voron-24-canbus-umbilical-mod
Nothing else changed except of added strain relief. Already got it installed in mine, not finished yet but it looks like it will work well. Strain relief to 2 holes for 2 small zipties, I think it's like 1.5mm wide or something similiar.
I've used one of A/B chains (smaller one, since I'll have just A and B motors wires inside), with added one chain link from other one to extend it by just a bit, so double check yours.
