Shoe Shield for Speedplay X-Series
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed shoe shield to protect your soles from the Speedplay X-series bowties
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I love Speedplay X series pedals!
I like the cleats further back on the shoe, and I use the part number 13330 cleat extender base to make that happen. The extender base is aluminum, so the stainless steel bowtie will wear the extender plate very quickly, causing slop in the pedal-to-cleat fit.
The Speedplay solution for the was 0.3-mm stainless shoe guard intended for expensive carbon-soled shoes. They worked great to protect my aluminum cleat extenders too. Unfortunately the wear guards are now impossible to find since Speedplay moved "back east" (offshore). and Wahoo does not support all of the old Speedplay products. Sidi did at least at one point offer wear guards.
I designed and printed these to give me a replaceable wear item. The one shown (centered in the image, at the bottom of the circular cut-out in the cleat base. All the parts are black so it is hard to distinguish) has THOUSANDS of miles on it. I printed two sets, one set for my shoes in ABS and the other set in PETG for my printed platform pedals. Part thickness is 1-mm, so it is not so thick as to cause problems with cleat mounting
Material as shown is Hatchbox ABS. Layer height is 0.2 mm, fill is 100%, though it is thin enough that there are only top and bottom layers, no infill layers.