Cubicle Wall Flag Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Perfect for adding some personality to your cubicle at work (or home)! This version holds the flag vertical This is…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Perfect for adding some personality to your cubicle at work (or home)! This version holds the flag vertical
This is designed to hold the 12-in by 18-in flags with 11/32-in (8.5-mm) diameter stick.
I am not sure what all types of cubicles that this will work with, but it has worked on both versions I have had at work.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
20%
Filament: Hatchbox ABS Gray (or whatever color you like!)
Notes:
Material, layer height, and fill are all flexible.rnPrint two parts, one as drawn, one reflected along the x-axis.rn
Remove the support materialrnGlue the two halves together. I use dichloromethane or acetone for ABS.rnClean out any remaining support with an 8.5-mm or 11/32-in drill bit.
Category: Office