Cubicle Wall Stick Flag Mount 45°
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Perfect for adding some personality to your cubicle at work (or home)! This version holds the flag at 45° below the…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Perfect for adding some personality to your cubicle at work (or home)! This version holds the flag at 45° below the vertical. Great for adding flair to your high wall cubicle
This is designed to hold the 4-in by 6-in stick flags with 7/32-in (5.5-mm) diameter stick.
I am not sure what all types of cubicles that this will work with, but it has worked on both versions I have had at work.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
20%
Filament: Hatchbox ABS Gray (or whatever you like!)
Notes:
Material, layer height, and fill are all flexible. Print two parts, one as drawn, one reflected along the x-axis.
Post-Printing =============
Remove the supports from the hole. Glue the parts together. I use dichloromethane or acetone for ABS. Clean out any remnants with a 7/32 or 5.5-mm diameter drill bit.
Category: Office