Bandanna Tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Works great to use a bandanna as a head band or a face mask! Made to works with typical 20-in square bandannas. The…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
Works great to use a bandanna as a head band or a face mask!
Made to works with typical 20-in square bandannas.
The blue one pictured is a small size.
Fold your bandanna along the diagonal to make a triangle.
Pull the ends through the holes to the desired tightness.
The large has a 12-mm big hole and a 6-mm small hole - This works for heavier weight fabric bandannas
The small has a 10-mm big hole and a 5-mm small hole - This works for lighter weight fabric bandannas
Print Settings
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: Yes
Supports: No
Resolution: 0.35-mm
Infill: 20%
Filament: Hatchbox ABS Whatever you like!
Notes:
Layer height and fill percentage are flexible. I have only printed in ABS, but I am sure other materials will work just fine as well. These parts have a small footprint, so a brim helps keep it down during the print.
Post-Printing - Remove the brim and lightly chamfer the edge with a file or sand paper as required.
Category: Accessories