Comeplete Sentry 3V8 siren project
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
(READ LICENSE) Compiled to fit all files into one (Unknown motor used).
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 207
- Wydruki
- 4
- Wyświetlenia
- 1234
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
All Sentry 3V8 siren parts here
If you are going to use this model for your own model, make sure the license matches and that you give me credit.
HOW TO BUILD:
1: Measure your motor's dimensions and modify the stator and rotor if needed.
1.1: Print the chopper assembly (stator and rotor).
2: Attach your motor (must fit in the original or your modified model) to the stator and align the rotor with the motor's shaft. Try your best to not tilt the rotor when inserting, or you will have to drill a hole that is straight for the shaft.
2.1: Glue the shaft to the rotor if necessary (if the rotor has slipping issues or is misplaced)
3: Print the stand after making sure the chopper assembly is fully functional.
4: Print the skirt and drill a hole wherever you want that is near the motor. This is needed for the wire to go through the motor cover and the skirt.
5. Print the motor cover and drill a hole on the top side or bottom side so your wire can go through the skirt.
6. Align the holes (skirt and motor cover) and glue them together on the chopper assembly.
7: Print top motor cover, align it and glue together.
if you have any questions or problems, feel free to message or comment!
I might make a video about this; I just need a reason to make even more sirens.