1 / 2
Airless bike trailer tire -TPU and PETG — zdjęcie 1
1 / 2

Airless bike trailer tire -TPU and PETG

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bike trailer airless tire - TPU and PETG

Ocena
0 / 5
Polubienia
11
Pobrania
27
Wydruki
0
Wyświetlenia
599
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
BSD License

Easy to print, only tpu capability required.

Printsettings:

  • Inner part:
    • more outer walls (up to 8 or 5 with 0,6mm nozzle)
    • infill min. 15% with adaptiv support infill (depending on infill pattern)
    • use brim
  • Outer part:
    • about min. 3 outer walls, more makes the wheel stiffer
    • use brim

Use a few screws to attach the two inner parts together.

Material: 

  • TPU or other Flex (not to flexible) material for yellow outer part
  • PETG or other simular heat resistant and strong material for inner part

is designed with big 12mm bearings in mind, but they can be replaced with KugellagerReplacement (keep in mind this part should be extra slippery and heat resistant)