1 / 1
Prusa MK3s Extruder Carriage for Bear X-axis with M3 nuts (remix)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a few modifications to the Carriage created by RoboMagnus.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 263
- Wydruki
- 2
- Wyświetlenia
- 2166
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 7)Remiksy (0)Kolekcje (52)Powiązane
Made a few modifications to the Carriage created by RoboMagnus.
- made the slot for the Belt 0.2mm wider -> fits better with my aftermarket GT2 belts.
- made all the Inserts for the square nuts higher, so i could put regular M3 nuts in there.
- added two cable tie channels for the bottom bearing.